Detail view of Tubes Fitting
Description
Our range of Tube Fittings are made up of high quality material including: brass, steel etc. depending upon various requirements of the end user. These tube fittings provide sturdy and tight integral line system.
Models
| Application | Structure Pipe, Hydraulic Pipe, Gas Pipe, Pneumatic Connections, Chemical Fertilizer Pipe |
|---|---|
| Size | 3 inch, 2 inch, 1 inch, 3/4 inch, 1/2 inch |
| Brand | SP ENgineers |
| Model | F-T-6 |
| Model |
Description |
|---|---|
| Fitting for 4mm OD Tube | |
| F-E-4T | Elbow M8 x 1 Or 1/8" BSP |
| F-B-4 | Banjo M8 x 1 Or 1/8" |
| F-E-B-4 | Elbow block |
| F-SC-4T | Straight connector M8 x1 Or 1/8" BSP |
| F-C-4 | Connector block |
| F-CR-4 | Cross block |
| Fitting For 6mm OD Tube | |
| F-E-6T | Elbow Male thread 1/8" thread 1/8" BSP to right angle |
| F-B-6 | Banjo Male thread 1/8" BSP to right angle |
| F-E-B-6 | Elbow block for joining two tubes of right angle |
| F-SC-6T | Straight connector 1/8" BSP or M8 x 1 to connect 6mm tube of end point |
| F-T-6 | Tee block for dividing main line into two lines |
| F-C-6 | Connector block for joining two tubes |
| F-CR-6 | Cross block dividingmain line into three lines |
| Fitting For 10mm OD Tube | |
| F-SC-10 | Straight connector |
| F-E-10 | Elbow |
| F-B-10 | Banjo |
| F-T-10 | Tee block |
| F-C-10 | Elbow block |
| F-CR-10 | Cross block |
| TUBES | |
|---|---|
| NT-4 | Nylon tube 4 mm OD |
| NT-6 | Nylon tube 6mm OD |
| NT-10 | Nylon tube 10mm OD |
| ST-4 | Steel tube (Copper Coated) 4 mm OD |
| ST-6 | Steel tube (Copper Coated) 6 mm OD |
| ST-10 | Steel tube (Copper Coated) 10 mm OD |