Detail view of Hand Operated Oil Pumps
Description
These pumps are suitable for manual centerlised lubrication system of light duty automatic machines such as small power presses, packing machines, milling machines, single spindle automats, looms, surface grinders, pouch fillings machines etc. Normally these pumps are suitable for 2-40 lubricant points
Construction
The construction is spring return piston type the piston is operated by pulling a cam handle. The other salient features are strainer at the inlet port, a pressure reducing system which is very important for proper operation of metering cartridges. Always fill clean oil to get better life and trouble free operation of these pumps. It is not recommended to operate dry pumps. Pumps are suitable for oil with viscosity range 40-1000cst.
Models
| S.no | Model Name | Details |
|---|---|---|
| 1 | MODEL H-7 | Without Reservoir. Discharge 7cc per stroke. Pressure setting 12 kg/cm2. |
| 2 | MODEL H-250-4 | Reservoir Cap. 0.25 Ltrs. Discharge 4cc per stroke. Pressure setting 12 kg/cm2. |
| 3 | H-600-6 | Reservoir Cap. 0.60 Ltrs. Discharge 6cc per stroke. Pressure setting 12/cm2. |
| 4 | H-1700-10 | Reservoir Cap. 1.70Ltrs. Discharge 10cc per stroke. Pressure setting 12kg/cm2. |
| 5 | MODEL H-250-4A | Reservoir Cap. 0.25 Ltrs. Discharge 4cc per stroke. Pressure Setting 12kg/cm². |
| 6 | H-600-6A | Reservoir Cap. 0.60 Ltrs, Discharge 6cc per stroke. Pressure Setting 12kg/cm². |
| 7 | H-1000-10A | Reservoir Cap. 1 Ltrs, Discharge 8cc per stroke. Pressure Setting 12kg/cm². |