Detail view of multiline radial lubricator

Application
Multiline radial lubricator is best suited for machine /plant where lubrication is required with high pressure continuously / intermittently for individual point. This lubricator are used for machine / plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, spong iron plant etc.
Construction
This lubricator comprise of a single pumping station having a number of plunger pump placed radically and fitted on to the outer periphery of the housing. Each plunger unit is given a reciprocating motion with the help of a cam. The cam rotates with the help of an electric motor and speed reduction gear box. The dose per plunger pump / cycle is 0.05 to 0.25cc (adjustable) with maximum pressure 200 Kg/cm2. These all plunger pump are connected to the lubrication point directly / progressive block by mean of tube, rubber hose, compression type fitting, clamping etc.
Filling Of Lubricants
Grease filling in the reservoir can be done manually as well as with the help of other pump. For pump ¼” BSP port is provided on reservoir.
Instructions
- Always use proper & clean lubricants. Avoid foreign particles in the pump. The foreign particles or dust items are the main responsible factor to damage physical components of the pump and chocking in the plunger body
- Always fill the lubricants before it is empty to avoid air in the pump. The presence of air may be resulted in improper quantity of discharge.
- Should always careful with regular maintenance of plungers and reservoir for its long life.
- Do not plug out put of any pumping unit..
Models
S.no | Model Name | Details |
---|---|---|
1 | RL-1.5-4 | Reservoir Cap. 1.5 Ltrs. Number of Outlets(Pump-Elements) 4. Motor 0.25 HP, 3Phase, 415V.AC, 4 Pole. Pressure setting 200kg/cm² maximum |
2 | RL-5-6 | Reservoir Cap. 5 Ltrs. Number of Outlets(Pump-Elements) 6. Motor 0.25 HP,3Phase, 415V.AC, 4 Pole. Pressure setting 200kg/cm² maximum |
3 | RL-15-12 | Reservoir Cap. 15 Ltrs. Number of Outlets(Pump-Elements) 12. Motor 0.50 HP, 3Phase, 415V.AC, 4 Pole. Pressure setting 200kg/cm² maximum |
4 | RL-30-20 | Reservoir Cap. 30 Ltrs. Number of Outlets(Pump-Elements) 20. Motor 1.0 HP, 3Phase, 415V.AC, 4 Pole. Pressure setting 200kg/cm² maximum |
5 | RL70-30 | Reservoir Cap. 70 Ltrs. Number of Outlets(Pump-Elements) 30. Motor 1.50 HP, 3Phase, 415V.AC, 4 Pole. Pressure setting 200kg/cm² maximum |